| 论文题目 | 刊物名称 | 刊物国家 | 收录情况 | 卷期 | 排名 |
|
S. Liu, L. Qian*, J. Meng, D. Li, et al, Simultaneously increasing both strength and ductility of Fe-Mn-C twinning-induced plasticity steel via Cr/Mo alloying
|
Scripta Materialia
|
国外
|
SCI
|
127 (2017)10–14
|
2通讯作者
|
|
L. Zhao, L. Qian*, J. Meng, et al, Below-Ms austempering to obtain refined bainitic structure and enhanced mechanical properties in low-C high-Si/Al steels
|
Scripta Materialia
|
国外
|
SCI
|
112 (2016) 96-100
|
2/通讯作者
|
|
L. Qian*, X. Cui, S. Liu, et al, Image-based numerical simulation of the local cyclic deformation behavior around cast pore in steel
|
Materials Sciences and Engineering A
|
国外
|
SCI
|
678 (2016) 347-354
|
1/通讯作者
|
|
L. Zhao, L. Qian*, S. Liu, et al, Producing superfine low-carbon bainitic structure through a new combined thermo-mechanical process
|
Journal of Alloys and Compounds
|
国外
|
SCI
|
685 (2016) 300-303
|
2/通讯作者
|
|
Q. Zhou, L. Qian*, J. Meng, et al, Low-cycle fatigue behavior and microstructural evolution in a low-carbon carbide-free bainitic steel
|
Materials and Design
|
国外
|
SCI
|
85 (2015) 487-496
|
2/通讯作者
|
|
Q. Zhou, L. Qian*, L. Zhao, et al, Loading-rate dependence of fracture absorption energy of low-carbon carbide-free bainitic steel
|
Journal of Alloys and Compounds
|
国外
|
SCI
|
650 (2015) 944-948
|
2/通讯作者
|
|
P. Ma, L. Qian*, J. Meng, et al, Influence of Al on the fatigue crack growth behavior of Fe-22Mn-(3Al)-0.6C TWIP steels
|
Materials Science and Engineering A
|
国外
|
SCI
|
645 (2015) 136-141
|
2/通讯作者
|
|
S. Liu, L. Qian*, J. Meng, et al, On the more persistently-enhanced strain hardening in carbon-increased Fe-Mn-C twinning-induced plasticity steel
|
Materials Science and Engineering A
|
国外
|
SCI
|
639 (2015) 425-430
|
2/通讯作者
|
|
J. Meng, Y. Feng, ..., L. Qian*, Effects of austempering temperature on strength, ductility and toughness of low-C high-Al/Si carbide-free bainitic steel
|
Journal of Materials Engineering and Performance
|
国外
|
SCI
|
24 (2015) 3068-3076
|
6/通讯作者
|
|
P. Ma, L. Qian*, J. Meng, et al, Fatigue crack growth behavior of a coarse- and a fine-grained high manganese austenitic twin-induced plasticity steel
|
Materials Science and Engineering A
|
国外
|
SCI
|
605 (2014) 160-166
|
2/通讯作者
|
|
郭鹏程、钱立和* 等, 高锰奥氏体TWIP钢的单向拉伸与拉压循环变形行为
|
金属学报
|
国内
|
SCI
|
50 (2014) 415-422
|
2/通讯作者
|
|
J. Xiao, F. Zhang*, L. Qian, Contact stress and residual stress in the nose rail of a high manganese steel crossing due to wheel contact loading
|
Fatigue & Fracture of Engineering Materials & Structures
|
国外
|
SCI
|
37 (2014) 219-226
|
3
|
|
S. Guo, D. Sun, ..., L. Qian, Damage of a Hadfield steel crossing due to wheel rolling impact passages
|
Wear
|
国外
|
SCI
|
305 (2013) 267-273
|
5
|
|
R. Huang, .., L. Qian, L. Li*, Giant Negative Thermal Expansion in NaZn 13-Type La(Fe, Si, Co) 13 Compounds
|
Journal of the American Chemical Society
|
国外
|
SCI
|
135 （2013) 11469-11472
|
6
|
|
P. Guo, L. Qian*, et al, Low-cycle fatigue behavior of a high manganese austenitic twin-induced plasticity steel
|
Materials Science and Engineering A
|
国外
|
SCI
|
584 (2013) 133-142
|
2/通讯作者
|
|
L. Qian*, P. Guo, et al, Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe-Mn-C twin-induced plasticity steel
|
Materials Science and Engineering A
|
国外
|
SCI
|
561 (2013) 266-269
|
1/通讯作者
|
|
Q. Zhou, L. Qian*, et al, Inconsistent effects of mechanical stability of retained austenite on ductility and toughness of transformation-induced plasticity
|
Materials Science and Engineering A
|
国外
|
SCI
|
578 (2013) 370-376
|
2/通讯作者
|
|
L. Qian*, P. Guo, et al, Unusual grain-size and strain-rate effects on the serrated flow in FeMnC twin-induced plasticity steels
|
Journal of Materials Science
|
国外
|
SCI
|
48 (2013) 1669-1674
|
1/通讯作者
|
|
L．Qian*, Q. Zhou, et al, Microstructure and mechanical properties of a low carbon carbide-free bainitic steel co-alloyed with Al and Si
|
Materials and Design
|
国外
|
SCI
|
39 (2012) 264-268
|
1/通讯作者
|
|
C. Zheng, ..., L. Qian, Effect of secondary cracks on hydrogen embrittlement of bainitic steels
|
Materials Science and Engineering A
|
国外
|
SCI
|
547 (2012) 99–103
|
6
|
|
B. Lv, .., L. Qian, et al, Micro-mechanism of rolling contact fatigue in Hadfield steel crossing
|
International Journal of Fatigue
|
国外
|
SCI
|
44 (2012) 273–278
|
6
|
|
F. Zhang*, Z. Yang, L. Qian, et al, High speed pounding: A novel technique for the preparation of a thick surface layer with a hardness gradient distribution
|
Scripta Materialia
|
国外
|
SCI
|
64 (2011) 560–563
|
3
|
|
L. Qian, X. Feng, F. Zhang*, Deformed microstructure and hardness of Hadfield high manganese steel
|
Materials Transactions
|
国外
|
SCI
|
52 (2011) 1623-1628
|
1
|
|
L.Qian*, X. Cui, et al, Cyclic deformation fields interactions between pores in cast high manganese steel
|
International Journal of Plasticity
|
国内
|
SCI
|
112 (2019) 18–35
|
1-通讯作者
|
|
L. Zhao, L. Qian*, ..., The combining effects of ausforming and below-Ms or above-Ms austempering on the transformation kinetics, microstructure and
|
Materials and Design
|
国外
|
SCI
|
183 (2019) 108123
|
2-通讯作者
|
|
J. Xiao, F. Zhang*, L. Qian, Numerical simulation of stress and deformation in a railway crossing
|
Engineering Failure Analysis
|
国外
|
SCI
|
18 (2011) 2296-2304
|
3
|
|
C. Zheng, ..，F. Zhang*, L. Qian，Hydrogen embrittlement of a manganese–aluminum high-strength bainitic steel for railway crossings
|
ISIJ International
|
国外
|
SCI
|
51 (2011) 1749–1753
|
6
|
|
H. Yang, R. Huang, ..., L. Qian, Structure and photoluminescence of VAC-functionalized ZnO nanoparticles by plasma polymerization
|
Applied Surface Science
|
国外
|
SCI
|
257 (2011) 4129–4132
|
6
|
|
Y. Zhang, F. Zhang*, L. Qian, T. Wang, Atomic-scale simulation of a/c-iron phase boundary affecting crack propagation using molecular dynamics method
|
Computational Materials Science
|
国外
|
SCI
|
50 (2011) 1754-1762
|
3
|
|
P. Zhang, F. Zhang*,..., L. Qian, Wear property of low-temperature bainite in the surface layer of a carburized low carbon steel
|
Wear
|
国外
|
SCI
|
271 (2011) 697–704
|
5
|
|
Y. Zhang, ..., L. Qian, Microstructural Characteristics of Hadfield Steel Solidified under High Pressure
|
High Pressure Research
|
国外
|
SCI
|
31 (2011), 634-639
|
5
|
|
Z. Chen, L. Qian, S. Zhu*, Determination and analysis of crack growth resistance in plasma-sprayed thermal barrier coatings
|
Engineering Fracture Mechanics
|
国外
|
SCI
|
77 (2010) 2136–2144
|
2
|
|
R. Huang,，L. Li*, ..., L. Qian, Spin-glass behavior in the antiperovskite manganese nitride Mn 3CuN codoped with Ge and Si
|
Solid State Communications
|
国外
|
SCI
|
150 (2010) 1617-1620
|
6
|
|
B. Lv, ..., L. Qian, et al, Effects of phosphorus and sulfur on the thermoplasticity of high manganese austenitic steel
|
Materials Science and Engineering A
|
国外
|
SCI
|
527 (2010) 5648–5653
|
5
|
|
L. Qian*, M. Todo, et al, Deformation Analysis of the Periodontium Considering the Viscoelasticity of the Periodontal Ligament
|
Dental Materials
|
国外
|
SCI
|
25 (2009) 1285-1292
|
1/通讯作者
|
|
L. Qian*, M. Todo, et al, Effects of Implant Diameter, Insertion Depth, and Loading angle on Stress/Strain Fields in Implant/Jawbone Systems: Finite Element
|
International Journal of Oral & Maxillofacial Implants
|
国外
|
SCI
|
24 (2009)877-886
|
1/通讯作者
|
|
L. Qian*, M. Todo, et al, Finite Element Analysis of Bone Resorption around Dental Implants
|
Journal of Biomechanical Science & Engineering
|
国外
|
EI
|
4 (2009) 365-376
|
1/通讯作者
|
|
P. Qu, H. Toda*, .., L. Qian, et al, Local Crack Driving Force Analysis of a Fatigue Crack by a Microstructural Tracking Method
|
Scripta Materialia
|
国外
|
SCI
|
61 (2009) 489-492
|
5
|
|
L. Qian*, H. Toda, et al, Direct Observation and Image-based Simulation of Three-dimensional Tortuous Crack Evolution inside Opaque Materials
|
Physical Review Letters
|
国外
|
SCI
|
100 (2008) 115505
|
1/通讯作者
|
|
R. Huang, L. Li*,..., L. Qian, Low-temperature Negative Thermal Expansion of the Anti-perovskite Manganese nitrides Mn3CuN Co-doped with Ge and Si
|
Applied Physics Letters
|
国外
|
SCI
|
93 (2008) 081902
|
5
|
|
L. Qian*, H. Toda, et al, Three-dimensional Visualization of Ductile Fracture in an Al-Si Alloy by High Resolution Synchrotron X-ray Microtomography
|
Materials Science and Engineering A
|
国外
|
SCI
|
483-484 (2008)293-296
|
1/通讯作者
|
|
L. Qian*, H. Toda, et al, Experimental and Numerical Investigations of the Effects of the Spatial Distribution of Alpha-phase on Fracture Behavior in
|
Acta Materialia
|
国外
|
SCI
|
54(2006)4881-4893
|
1/通讯作者
|
|
L. Qian*, H. Toda, et al, Application of Synchrotron X-ray Microtomogrphy to Investigate Ductile Fracture in Al Alloys
|
Applied Physics Letters
|
国外
|
SCI
|
87 (2005) 241907
|
1/通讯作者
|
|
L. Qian*, H. Toda, et al, Numerical Simulation of Fracture of Model Al-Si alloys
|
Metallurgical Materials and Transactions A
|
国外
|
SCI
|
36A (2005) 2979-2992
|
1/通讯作者
|